High-pressure refrigerated dryers, up to 3000 scfm

Installation Technical Specifications HT’s are delivered ready for installation; simply connect the piping and electric Rated Inlet/Outlet Dimensions Power Supply Weight service. ) clearance allow easy placement by forklift or HT-115 115 110 pallet jack. 6 x 43 To correct Rated Capacity for actual HT-600 600 2” NPT-M 390 HT-750 750 730 operating conditions, refer to “Capacity HT-1000 1000 3” 300# FLG 44 x 40 x 62 830 Correction Factors and find the capacity 460 / 3 / 60 HT-1200 1200 870 correction factors corresponding to the HT-1600 1600 inlet and ambient conditions.

Multiply 1570 HT-2000 2000 4” 300# FLG 32x 77 x 69 these factors to find the “overall” capacity HT-2400 2400 1795 correction factor, then multiply any dryer’s • Maximum/minimum Inlet temperature: 40°F - 150°F rated capacity by the overall correction factor • Maximum/minimum ambient air temperature: 34°F - 122°F to determine its capacity at your operating • All units are air-cooled conditions. Capacity correction factors for Specifications are subject to change without notice. conditions not shown may be interpolated.

03 Pre-filter Separator Inlet Temp. Factor Ambient Temp. 45 Note: All components must be properly pressure rated.

Schematic does not show recommended accessories such as sequencers, drains, flow controller, or condensate management system. * For compressors without an integrated moisture separator. Kaeser Compressors, Inc.

Kaeser Compressors Canada Inc. Kaeser Compresores de México Kaeser Compresores de 511 Sigma Drive 3760 La Vérendrye Street S de RL de CV Guatemala y Cia. Ltda.

Fredericksburg, VA 22408 USA Boisbriand, QC J7H 1R5 CANADA Calle 2 #123 3a calle 6-51, zona 13 Telephone: 540-898-5500 Telephone: (450) 971-1414 Parque Industrial Juríca Colonia Pamplona Toll Free: 800-777-7873 Toll free: (800) 477-1416 76100 Querétaro, Qro. com © 2025 Kaeser Compressors, Inc. All rights reserved.

02/25 USHT