Oil Mist Eliminator
Oil Mist Eliminator
) equipment from contamination caused by oil OME 125 125 OME 1 or water slugging. 44 x 25 775 resistant glass fibers. 5” FLG 1770 interception resulting from Brownian motion.
Service & Support for Oil Mist Eliminator
American Compressor Company sells, services, repairs, and supports Filters across Los Angeles County and Southern California.
) equipment from contamination caused by oil OME 125 125 OME 1 or water slugging. 44 x 25 775 resistant glass fibers. 5” FLG 1770 interception resulting from Brownian motion.
OME 6000 6000 OME 11 155 x 40 2460 8” FLG 2” FLG The captured liquids move along the fibers OME 8000 8000 OME 12 181 x 40 2850 and coalesce into larger droplets that fall Maximum working pressure: 150 psig. Maximum operating temperature: 150°F to the bottom of the housing where they Consult factory for higher pressure are removed by a condensate drain (sold Specifications are subject to change without notice. separately).
Compressed Air System with Oil Mist Eliminator Sizing Maximum air flow at 100 psig is indicated in the Specifications Table. To determine maximum air flow at pressures other than 100 psig, multiply the flow @ 100 psig by the multiplier in the Multiplier Table that corresponds to the minimum operating pressure at the inlet of the filter. 20 Factor Kaeser Compressors, Inc.
Kaeser Compressors Canada Inc. Kaeser Compresores de México Kaeser Compresores de 511 Sigma Drive 3760 La Vérendrye Street S de RL de CV Guatemala y Cia. Ltda.
Fredericksburg, VA 22408 USA Boisbriand, QC J7H 1R5 CANADA Calle 2 #123 3a calle 6-51, zona 13 Telephone: 540-898-5500 Telephone: (450) 971-1414 Parque Industrial Juríca Colonia Pamplona Toll Free: 800-777-7873 Toll free: (800) 477-1416 76100 Querétaro, Qro. com © 2025 Kaeser Compressors, Inc. All rights reserved.
03/25 USOME
Documentation
Datasheets and product literature for Oil Mist Eliminator.
