AQUAMAT i.CF
condensate treatment
- For compressor flow rates from 400 to 3300 scfm
A better way to manage condensate Liquid condensation is an unavoidable by-product of compressed air systems. It is mostly water, but also contains small amounts of compressor fluids and other contaminants that may not be directly discharged into gr…
Service & Support for condensate treatment
American Compressor Company sells, services, repairs, and supports Condensate across Los Angeles County and Southern California.
A better way to manage condensate Liquid condensation is an unavoidable by-product of compressed air systems. It is mostly water, but also contains small amounts of compressor fluids and other contaminants that may not be directly discharged into groundwater, storm sewers or sanitary sewers. Some type of oil-water separator may be required to remove contaminants to ensure the discharged water meets local regulations.
CF design sets new standards when it comes to through 90 models monitors the condensate level and activates cleanliness. The drip-stop valve at the bottom of every cartridge light pulses of compressed air to promote the even distribution prevents leaks and spills. No contact with the condensate of condensate throughout the cartridge(s).
This optimizes is necessary when changing the cartridges, protecting both the adsorptive capacity of the cartridges, and combined with service personnel and work site. For added convenience, the “always wet” operation, prevents the formation of channels and AQUAMAT CONTROL purges water from the cartridges before impermeable layers which may result in poor performance and replacement. This saves time and makes the emptied cartridges spillage.
CF units make complete use lighter and easier to handle. of the filtration media and have higher capacities than simple gravity flow condensate filters. CF models 10 to 60 can be expanded as your to provide operating status information as well as service compressed air system grows (see page 6).
Since all models reminders. It continuously displays the remaining cartridge use the same cartridge type, spare parts management is simple. capacity for better maintenance planning.
CF 10 model can easily be retrofitted with the can also be externally monitored via Modbus TCP or WLAN. CF 15. CF, KAESER has taken condensate management to the next level to improve separation, maximize cartridge capacity, simplify service and eliminate contact with oily condensate.
CF is available in multiple configurations for flow rates from 400 to 3300 scfm. 2
Documentation
Datasheets and product literature for condensate treatment.
